Low quiescent current: 80uA

Switch charge with high efficiency up to 93%@3.0A

Charge current up to 3.0A

Frequency for charger：500KHz

Charge current could be regulated by the temperature, this realize the maximum charge rate, without overheat risk

C/10 charge terminated and recharge automatically

Terminated charge voltage : 4.2V， accuracy is ±1% Regulate the charge current refer to the adapter’s ability automatically

DPPM(Dynamic Power-Path Management) voltage is selectable: VCC 4.5V or VOUT 4.85V

Boost output 5.1V with High efficiency up to 95%@3A

Frequency for boost：500KHz

Output current up to 3.6A

Detect the load automatically and auto shunt down at no load condition

Original temperature management technology for boost

Over-current protection (OCP), over voltage protection (OVP), over temperature protection (OTP) and short circuit protection ( SCP ) are integrated for boost

4 LEDs display to indicate the battery fuel gauge

Short press the KEY for battery fuel gauge display; long press and hold the KEY to shut down the boost; double pressing the KEY to open or close the torch.

Support current balance control, every port output current is controlled (Port A: 2.8A, Port C: 3.4A); the total output current is controlled (total output current: 3.6A).

Supports Type-C DRP Try. SRC function.

Supports USB DCP Shorting D+ Line to  D- Line per USB Battery Charging Specification, Revision 1.2 (BC1.2)

Supports Shorted Mode (Shorting D+ Line to D- Line) per Chinese Telecommunication Industry Standard YD/T 1591-2009

Supports USB DCP Applying 2.7 V on D+ Line and 2.7 V on D- line，supports Apple, Samsung etc.